Home > Hand Tap And Die

Hand Tap And Die

Taps and dies are tools used to create purpose screw threads, which is called threading. Many are cutting tools; others are forming tools. A tap is used to cut or form the female portion of the mating pair (e.g. a nut). A die is used to cut or form the male portion of the mating pair (e.g. a bolt). The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading. Using an ordinary tap or die to clean threads generally removes some material, which results in looser, weaker threads. Because of this, machinists generally clean threads with special taps and dies-called chasers-made for that purpose.

Related Youtube Videos

Certification

Industry Information

Basic Information Of Tape Measure

Basic Information Of Tape Measure High quality tape measure is a commonly used measuring tool in daily life. We often see steel tape, commonly used in construction and decoration, but also one of the essential household tools. Divided into fiber...
Diamond drill bit

Diamond drill bits (PDC drill bits) Diamond composite drill bits are known as diamond drill bits. The drill is a one-piece drill, the whole drill has no moving parts, the structure is simple, and it has high strength, high wear resistance and impact...
Sharing the digging machine drill bit torque dynamics technology

In order to solve the problem of short working time and long interval time of the digging machine, in order to increase the utilization rate of the machine, it is proposed to develop a multi-machine type digging machine. The sea mechanical...
How to drill a deep hole drill bit?

For deep-hole drill bits, one of the problems that we often encounter in specific applications is how to drill the deep-hole drill bit. Today, we will give specific explanations on this knowledge and hope to adopt ours. Introduction can better help...